Langham Multi Purpose Raisers

Langham Multi-Purpose Raiser Main Unit 1 per box - Product code: LINK500 | Add On Height Sections (12 per box) - Product code: LINK510 | Spreader Link Bars (6 per box) - Product code: LINK520

The range of multi purpose raisers is designed to raise beds, chairs and settees with castors. The main units provide a raise of 3”(75mm). However, there are additional height sections available providing an extra 0.75” (20mm) per layer added, up to a safe maximum raise of 6” (152mm). The pivoting action of each corner support allows a snug, unobtrusive fit against furniture.

Swivelling action on raising cups - can be rotated so they fit snugly against even the most awkward corners
Maximum load 75 stone (476kg)

To raise a single divan bed you will need to order

3 x LINK500- Three main units (one at each end of the bed, plus one in the centre).
Add on height sections as required (order 1 x LINK510)

To raise a double divan bed you will need to order

3 x LINK500- three main units (one at each end of the bed, plus one in the centre)
1 x LINK520- you will use three of the spreader bars to extend the width of the main units.
Add on height sections as required (1 x LINK510)

To raise an armchair you will need to order

2 x LINK500- two main units.
1 X LINK520- a spreader link bar to join the main units beneath the chair.
1 X LINK510- add on height sections as required.


To raise a small settee you will need to order

3 X LINK500- three main units, one each end of the settee, and one in the centre.
1 X LINK510. Add on height sections as required.